PHANTEKS Eclipse P400A Air Gaming Case - Black With Tempered Glass Window

Phanteks  Eclipse P400A Air Gaming Case - Black With Tempered Glass Window


The PHANTEKS Eclipse P400 Air Midi-Tower offered here comes from PHANTEKS' Eclipse series of cases, and its clean lines and ascetic style in black tells you PHANTEKS is pulling no punches in the design department. The metal mesh grid at the front in combination with the large tinted tempered glass side window all combine to make for a truly premium aesthetic.

Users will find a convenient reset switch as well as a control for adjusting the fans' speeds located in the indentation between the roof and the upper air inlet in the front. The power switch is located towards the front of the case in the centre of the case's roof, both audio jacks and USB 3.0 ports are located on the side of the front panel facing to the right. A large, removable dust filter, which acts like a large mesh grille and rests on a large vent takes up the majority of the lid.
Medium-Sized Case for Gaming Graphics Cards & AiO Water Cooling
The interior of the Eclipse P400 Air continues on with the premium looks of its exterior with attractive black paint. The inside of the case is divided in two by means of a PSU shroud complete with integrated air vents on its top. The presence of this PSU shroud helps conceal both drive bays, which in turn allow for tool-free mounting of two 3,5- or 2,5" drives via the case's right side after removing the side cover which is attached with user-friendly thumb screws. Up to two SSDs can be installed to the rear of the motherboard with "Drop-N-Lock" SSD brackets, and PHANTEKS also factored in convenient cable management - reserving 25 mm of space here for said purpose. Velcro cable ties enable users to neatly route their cabling and the presence of rubberised pass-throughs help to keep said cables in top condition.

The PHANTEKS Eclipse P400 Air has got hard core gamers covered when it comes to hardware: graphics cards up to 420 mm in length are supported with radiator mounts for AiO and custom water cooling solutions. The rear of the case also supports the installation of a 120 mm fan or a similarly-sized radiator if you prefer, while the front supports three 120 mm fans or two 140 mm fans. Instead of fans, if you prefer, the case will also support 280- or 360 mm radiators in the front. If users wish to install a 360 mm radiator however, a panel in the PSU shroud as well as the HDD cage must be removed. In addition to the two pre-installed 120 mm fans on the front, up to two 120- or 140 mm fans can be mounted in the roof along.
Quality Lighting
Those wishing to add a larger traditional-style CPU cooler to their setup can opt for models up to 16 cm in height, while your gaming system is free to use power supplies up to 270 mm in length. With the help of the accessories (available separately), users can forfeit the additional space for the GPU or radiator in the front and opt instead for up to four additional 3,5-/2,5" drives. There's even the possibility of installing the graphics card in a vertical orientation.

Technical Details:
Dimensions: 210 x 465 x 470 mm (W x H x D)
Weight: approx. 7 kg
Material: Steel, plastic, tempered glass
Colour: Black
Form factor: E-ATX (up to 272 mm wide), ATX, Micro-ATX, Mini-ITX
Total possible fans:
2x 140 / 3x 120 mm (front)
2x 140 / 120 mm (roof)
1x 120 mm (rear)
2x 120 mm (front)
Radiator Mountings (forfeits HDD- and/or fan slots):
1x max. 280/360 mm (front)
1x max. 120 mm (rear)
Filter: Front, PSU, roof (removable)
Drive Bays:
2x 2,5" (behind motherboard tray)
2x 2,5/3,5" (internal; tool-free installation)
PSU: 1x Standard ATX (optional)
Expansion slots: 7
I/O Panel:
1x Power button
1x Fan controller
2x USB 3.0
2x Audio
Max GPU length: 420 mm
Max CPU cooler height: 160 mm
Max PSU length: 270 mm

Product Number: 100089604
Product Code: PH-EC400ATG_BK0

3 In stock
Available for Collect In Store
Available for Home Delivery

£65.00inc vat
£54.17ex vat
Was: £69.99 (£58.33 ex vat)